SWAMPY [Usage]

The "Swampy Paint Roller Cleaning System" is designed to clean a paint roller in around 2 minutes and uses considerably less water than is used and wasted using current cleaning methods.

Only ~2.5 litres of water is required to clean a 450 mm paint roller.

"Swampy Paint Roller Cleaning System" Procedure

1: Used paint roller.	2: Recover paint by scraping out the "nap" of roller.	3: Insert used rollers into "Pre-clean" drum.
4: Scrape out waste #1.	5: Scrape out waste #2.	6: Insert roller into "Swampy".
7: Insert "Spray Gun".	8: Place "Spray Gun" over roller, and press the trigger to express water through the spray nozzle.	9: Express water down the full length of the "nap" of the roller.
10 Using the speed control, slowly vary the speed of the roller until maximum speed is reached, then, stop the spin.	11: Repeat the "Spin Cycle" (steps 8 to 10), until the roller is clean.	12: Cleaned roller.